DVD VXY2010, Power Supply VEP09150, Digital HDMI Board VEP79180, VCR Main Board VEP06G41, VCR VEG1697,
Pulled Good working unit Parts
All parts Test passed-OK
Select option P/N
|
Select # |
$ |
Part Description/Model |
P/n |
|
1. |
139.95 |
VCR Assembly the Head Sankyo HM28A |
VEG1697 |
|
2 |
89.95 |
VCR Main Board PCB |
VEP06G41 |
|
3 |
89.95 |
Digital Main Board Processor Magnum- |
VEP79180 EZ-48v EZ485v
|
|
4 |
139.95 |
Power supply Board |
VEP09150 |
|
5 |
159.95 |
DVD-RW Drive |
VXY2010 |
|
6 |
59.95 |
Front Cover assembly w/PCB Board complete |
EZ48 |
|
7 |
$5 |
Contact order |
|
|
|
|
|
|
Troubleshooting Solutions
|
1.The DVD Drive make two-three times noise than stop spin the media CD or DVD. 2 The drive does spin CD-DVD but doesn't load. 3. Error F-60 or U-61 4. Drive spinning but don’t load CD or DVD
5. change the fuse and it immediately burns 6. Plug-in power cord Unit will receive power on the display 000000, then hane to message "BUY", but unit without message BUY turned OFF itself 7. Error F03,F04 8. Only one "0000" Flashed or "Hello " Only 9. VCR- only shows white snow no picture 10. Error F06 11. After 2-5min Unit shout down it self |
1.Molfunction DVDRW Drive. 2. Malfunction HDMi PCB VEP79180 or VJB79180 3.Malfunction Power Supply or HDMi PCB 4. More chance Bad Drive or Problem with drive PCB. Check:Open top Cover of drive, open tray, close tray. If laser flashed but doesn’t play CD-DVD more chance bad drive PCB board 5. Replace Main Power Board VEP09150
6.More chance some thing wrong with digital main board. Pull it out and attach it back. 7. More Chance Malfunction VCR Main Board or VCR Replace it 8. Malfunction VCR Main Board VEP06G41 9. Malfunction VCR HEAD 10 More chance malfunction VCR Main Board or VCR 11. Open the top cover. DVD disk play OK, look at the fan, if after 2-5 min the Fan do not START running, unit overheat. More chance need replace the FAN
|
